Business. In perspective.Русский
BREAKASHNEWS
Dispatches

Danfoss Turbocor expands Tallahassee compressor production

Danfoss Turbocor opened a Tallahassee plant to double compressor capacity, with local engineering work and a customer case showing process-cooling applications.

Industrial compressor assembly
Industrial compressor assembly

Additional production space in Tallahassee

Danfoss Turbocor inaugurated a 145,000-square-foot production facility in Tallahassee, Florida, in the United States, on May 29, 2024. The $62 million investment doubles existing manufacturing capacity and accommodates the company’s TTS, TG and TH compressor lines. The site adds production space alongside its earlier facility.

Turbocor compressors use magnetic bearings instead of oil lubrication in commercial air conditioning and heat pumps. Danfoss chief executive Kim Fausing linked the additional output to demand in North America, Europe and Asia. Turbocor president Ricardo Schneider connected the expansion to manufacturing closer to customers.

Process cooling equipment
Process cooling equipment

The new building will use Turbocor compressors and heat recovery to reduce energy consumption. The company also supports scholarships, research and workforce training at local two- and four-year colleges.

Continuous cooling for plastic moulding

Universal Plastic Mold, or UPM, uses chilled water to cool the moulds in approximately 30 plastic injection-moulding machines. Its manufacturing operation runs around the clock throughout the year and requires a constant water supply at 55 degrees Fahrenheit. In 2003, UPM sought replacement chillers as it expanded production of plastic totes.

Compressor and factory milestones
Compressor and factory milestones

Two Thermal Care chillers were commissioned in November 2003, each containing two Turbocor TT300 compressors. Danfoss’s January 2023 customer case study attributed reduced downtime and maintenance costs to the replacement of UPM’s reciprocating chillers. Maintenance and environmental manager Rich Smits identified uninterrupted cooling as essential because its loss stops manufacturing.

One TT300 was retired in early 2022 after 18 years and replaced with a refurbished unit. Danfoss reported that an examination found its magnetic bearings and impellers in very good condition. The other three original compressors continued operating in the application. These observations concerned UPM’s installation, rather than production results from the new Tallahassee factory.

Danfoss
Danfoss

A separate local engineering project

A FAMU-FSU College of Engineering student team was also working with Danfoss on compressor testing equipment. Its October 19, 2023 design review set out a proposed apparatus for four inlet guide vane models. The fixture was intended to test functionality and give an operator a pass-or-fail result.

Joseph Bechara handled controls, Hunter Dabbs systems engineering, Tye Fountain mechanical design and Thiago Todesco manufacturing engineering. Danfoss manufacturing engineer Bruce Barnett served as engineering mentor; Shayne McConomy was the academic adviser. The presentation described a sequence of vane assembly, testing, separation by model and subsequent compressor assembly.

Tallahassee, United States
Tallahassee, Florida

The project’s proposed measurements and identification functions included:

  • measuring electrical resistance from the motor;
  • tracking vane-blade movement;
  • tracking a ball indicator’s position;
  • identifying the inlet guide vane model.

The controls concept included barcode-scanner input, information storage and test start-and-stop functions. Visual and audible indications were proposed for communicating results. Concept selection, risk assessment, modelling and prototype testing remained future work in that review; the presentation did not establish deployment of the fixture in the new factory.

Leave a comment

Latest articles